- Designed for suspension over choirs, instrumental groups and theater stages
- UniLine polar pattern provides narrow 90° acceptance angle
- UniGuard® RFI-shielding technology offers outstanding rejection of RF
- UniSteep® filter provides a steep low-frequency attenuation
- Accepts interchangeable elements
- Operates on battery or phantom power
- Designed for suspension over choirs, instrumental groups and theater stages
- UniLine polar pattern provides narrow 90° acceptance angle
- UniGuard® RFI-shielding technology offers outstanding rejection of RF
- UniSteep® filter provides a steep low-frequency attenuation
- Accepts interchangeable elements
- Operates on battery or phantom power
Element | Fixed-charge back plate, permanently polarized condenser |
Polar Pattern | Line Cardioid |
Frequency Response | 30 - 20,000 Hz |
Open Circuit Sensitivity | Phantom: -38 dB (12.5 mV) re 1V at 1 Pa - Battery: 39 dB (11.2 mV) re 1V at 1 Pa |
Impedance | Phantom: 200 ohms - Battery: 270 ohms |
Maximum Input Sound Level | Phantom: 130 dB, 1 kHz at 1% T.H.D. - Battery: 120 dB SPL, 1 kHz at 1% T.H.D. |
Low Frequency Roll Off | 80 Hz, 18 dB/octave |
Switches | Off, on-flat, on-roll-off |
Dynamic Range | Phantom: 110 dB, 1 kHz at Max SPL - Battery: 100 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | 74 dB, 1 kHz at 1 Pa |
Phantom Power Requirements | 11-52V DC, 2 mA typical |
Battery Type | 1.5V AA/UM3 |
Battery Current/Life | 0.4 mA / 1200 hours typical (alkaline) |
Weight | 30 g |
Dimensions | 6.14" (156.0 mm) long, 0.48" (12.2 mm) diameter |
Output Connector | Integral 3-pin XLRM-type |
Cable | 25.0" (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector |
Accessories Included | AT8154 two-stage foam windscreen; AT8451 steel hanger; AT8531 power module; AT8438 5/8"-27 stand adapter; battery |
Element | Fixed-charge back plate, permanently polarized condenser |
Polar Pattern | Line Cardioid |
Frequency Response | 30 - 20,000 Hz |
Open Circuit Sensitivity | Phantom: -38 dB (12.5 mV) re 1V at 1 Pa - Battery: 39 dB (11.2 mV) re 1V at 1 Pa |
Impedance | Phantom: 200 ohms - Battery: 270 ohms |
Maximum Input Sound Level | Phantom: 130 dB, 1 kHz at 1% T.H.D. - Battery: 120 dB SPL, 1 kHz at 1% T.H.D. |
Low Frequency Roll Off | 80 Hz, 18 dB/octave |
Switches | Off, on-flat, on-roll-off |
Dynamic Range | Phantom: 110 dB, 1 kHz at Max SPL - Battery: 100 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | 74 dB, 1 kHz at 1 Pa |
Phantom Power Requirements | 11-52V DC, 2 mA typical |
Battery Type | 1.5V AA/UM3 |
Battery Current/Life | 0.4 mA / 1200 hours typical (alkaline) |
Weight | 30 g |
Dimensions | 6.14" (156.0 mm) long, 0.48" (12.2 mm) diameter |
Output Connector | Integral 3-pin XLRM-type |
Cable | 25.0" (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector |
Accessories Included | AT8154 two-stage foam windscreen; AT8451 steel hanger; AT8531 power module; AT8438 5/8"-27 stand adapter; battery |