- Designed for high-quality sound reinforcement
- UniLine® polar pattern provides narrow 90° acceptance angle
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology
- UniSteep® filter provides a steep low-frequency attenuation
- Accepts interchangeable elements
- Designed for high-quality sound reinforcement
- UniLine® polar pattern provides narrow 90° acceptance angle
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology
- UniSteep® filter provides a steep low-frequency attenuation
- Accepts interchangeable elements
- Designed for high-quality sound reinforcement
- UniLine® polar pattern provides narrow 90° acceptance angle
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology
- UniSteep® filter provides a steep low-frequency attenuation
- Accepts interchangeable elements
| Element | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern | Line Cardioid |
| Frequency Response | 30 - 20,000 Hz |
| Open Circuit Sensitivity | -35 dB (17.7 mV) re 1V at 1 Pa |
| Impedance | 250 ohms |
| Maximum Input Sound Level | 135 dB SPL, 1 kHz at 1% T.H.D. |
| Low Frequency Roll Off | 80 Hz, 18 dB/octave |
| Switches | Flat, roll-off |
| Dynamic Range | 115 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio | 74 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 11-52V DC, 2 mA typical |
| Weight | Microphone: 148 g Power Module: 81 g |
| Dimensions | Microphone: 21.38" (543.0 mm) long, 0.48" (12.2 mm) head diameter Power Module: 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter |
| Output Connector | Integral 3-pin XLRM-type |
| Cable | 9.8" (3.0 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector |
| Accessories Included | AT8538 power module; AT8663 A-mount flange; AT8664 A-mount cable pass-through adapter; AT8154 two-stage foam windscreen |
| Element | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern | Line Cardioid |
| Frequency Response | 30 - 20,000 Hz |
| Open Circuit Sensitivity | -35 dB (17.7 mV) re 1V at 1 Pa |
| Impedance | 250 ohms |
| Maximum Input Sound Level | 135 dB SPL, 1 kHz at 1% T.H.D. |
| Low Frequency Roll Off | 80 Hz, 18 dB/octave |
| Switches | Flat, roll-off |
| Dynamic Range | 115 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio | 74 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 11-52V DC, 2 mA typical |
| Weight | Microphone: 148 g Power Module: 81 g |
| Dimensions | Microphone: 21.38" (543.0 mm) long, 0.48" (12.2 mm) head diameter Power Module: 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter |
| Output Connector | Integral 3-pin XLRM-type |
| Cable | 9.8" (3.0 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector |
| Accessories Included | AT8538 power module; AT8663 A-mount flange; AT8664 A-mount cable pass-through adapter; AT8154 two-stage foam windscreen |
| Element | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern | Line Cardioid |
| Frequency Response | 30 - 20,000 Hz |
| Open Circuit Sensitivity | -35 dB (17.7 mV) re 1V at 1 Pa |
| Impedance | 250 ohms |
| Maximum Input Sound Level | 135 dB SPL, 1 kHz at 1% T.H.D. |
| Low Frequency Roll Off | 80 Hz, 18 dB/octave |
| Switches | Flat, roll-off |
| Dynamic Range | 115 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio | 74 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 11-52V DC, 2 mA typical |
| Weight | Microphone: 148 g Power Module: 81 g |
| Dimensions | Microphone: 21.38" (543.0 mm) long, 0.48" (12.2 mm) head diameter Power Module: 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter |
| Output Connector | Integral 3-pin XLRM-type |
| Cable | 9.8" (3.0 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector |
| Accessories Included | AT8538 power module; AT8663 A-mount flange; AT8664 A-mount cable pass-through adapter; AT8154 two-stage foam windscreen |