- Designed for surface-mount applications
- Cardioid polar pattern with 120º acceptance angle
- Mounts unobtrusively in table-tops, ceilings and wall panels
- Isolators provide mechanical dampening of mounting-surface vibration
- Operates on 9-52V phantom power only
- UniGuard® RFI-shielding technology
- Designed for surface-mount applications
- Cardioid polar pattern with 120º acceptance angle
- Mounts unobtrusively in table-tops, ceilings and wall panels
- Isolators provide mechanical dampening of mounting-surface vibration
- Operates on 9-52V phantom power only
- UniGuard® RFI-shielding technology
Element | Fixed-charge back plate, permanently polarized condenser |
Polar Pattern | Half-cardioid (Cardioid in hemisphere above mounting surface) |
Frequency Response | 40 - 12,000 Hz |
Open Circuit Sensitivity | -42 dB (7.9 mV) re 1V at 1 Pa |
Impedance | 200 ohms |
Maximum Input Sound Level | 142 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range | 113 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | 65 dB, 1 kHz at 1 Pa |
Phantom Power Requirements | 11-52V DC, 2 mA typical |
Weight | 64 g (2.3 oz) |
Dimensions | 69.0 mm (2.72") long, 30.0 mm (1.18") diameter |
Output Connector | Integral 3-pin XLRM-type |
Accessories Included | One pair isolators |
Element | Fixed-charge back plate, permanently polarized condenser |
Polar Pattern | Half-cardioid (Cardioid in hemisphere above mounting surface) |
Frequency Response | 40 - 12,000 Hz |
Open Circuit Sensitivity | -42 dB (7.9 mV) re 1V at 1 Pa |
Impedance | 200 ohms |
Maximum Input Sound Level | 142 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range | 113 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | 65 dB, 1 kHz at 1 Pa |
Phantom Power Requirements | 11-52V DC, 2 mA typical |
Weight | 64 g (2.3 oz) |
Dimensions | 69.0 mm (2.72") long, 30.0 mm (1.18") diameter |
Output Connector | Integral 3-pin XLRM-type |
Accessories Included | One pair isolators |